Milo™ - Motion Frame™ Acessories
One of the things that makes the Milo™ - Motion Frame™ so versatile is the ability to customize your setup with a handful of simple accessories.
The standard Milo™ - Motion Frame™ allows you to create motion with five decoys, but the accessory system gives you the ability to add more decoys, change their spacing, create different types of movement, or quickly swap between decoys throughout the season.
Everything is designed around our simple Accessory Mount, making it easy to plug in the setup that works best for the hunt you're on.
Decoy Clips: Rig Your Decoys Ahead of Time
Decoy Clips connect your decoys to the MILO Motion Frame and are one of the simplest ways to make your setup more versatile.
While you can move clips from one decoy to another, we recommend keeping extras on hand and pre-rigging the decoys you use most often.
That might mean having different species ready for changing migration conditions or simply having several different decoy combinations ready to go.
Instead of rebuilding your setup every time you want to make a change, you can simply disconnect one decoy and plug another into the Motion Frame.
Plug and play.
There's another benefit, too. If you ever lose or leave behind one of your other accessories, a Decoy Clip can connect directly to the accessory mount so you can continue running a decoy from that position.
Simple is good.
Feeder Arms: Add Natural Feeding Motion
The Feeder Arm is the standard accessory arm that comes included with your Milo™ - Motion Frame™. It's designed to change how a decoy moves at the end of the Main Beam but added just a bit of distance.
Rather than attaching the decoy directly at the accessory mount, the short extension creates additional spacing and movement that helps give the decoy more of a natural feeding appearance.
Feeder Arms attach directly to the accessory mount and measure approximately 3.25 inches from center to center.
Two Feeder Arms are already included with every Milo™ - Motion Frame™, but additional sets are available if you want extras in your gear bag or want to build out additional configurations.
Dual Spreader Arms: Turn Five Moving Decoys Into Seven
Want more motion?
The Dual Spreader Arm allows you to add another decoy to each end of the Milo™ - Motion Frame™.
With the Spreader Arm installed on both ends, you can take the standard five-decoy setup and turn it into a seven-decoy motion system.
Each Spreader Arm provides approximately 22 inches of spread and attaches directly to the accessory mount.
Installation is simple: slide back the accessory-mount cap, remove the existing Feeder Arm or Decoy Clip, install the Dual Spreader Arm, and close the cap.
Just like that, you've added two more moving decoys to your spread.
One Motion Frame. Lots of Options.
The idea behind the MILO accessory system is pretty simple: you shouldn't be locked into one configuration.
Use the standard five-decoy setup when that's all you need. Add Spreader Arms when you want seven birds moving. Use Feeder Arms or Action Arms to adjust spacing and movement. Keep additional Decoy Clips pre-rigged on different decoys so you can respond to changing birds, conditions, or hunt locations.
The accessories can be mixed, matched, removed, and replaced in seconds.
Build the setup you want, change it whenever, put it in the water, and let Milo do the moving.
Build Your MILO Setup
Whether you're looking to add more motion, change your decoy spacing, or keep several different decoys ready to go, MILO accessories make it easy to customize your Motion Frame for the way you hunt.
Explore Decoy Clips, Feeder Arms, Action Arms, and Spreader Arms and build the setup that works for your spread.
Move Easy™
